The Master Grade (MG) F91 Gundam F91 (Harrison Madin Custom) is a 1/100 scale kit released in 2006.
Includes[]
- F91 Gundam F91 (Harrison Maddin)
- 1/100 Harrison Madin figurine (Sitting)
- 2 Beam Sabers
- Extra Shield Generator
- 2 V.S.B.R.s
- Beam Rifle
- Beam Bazooka (referred as Beam Launcher)
- Beam Shield
- 1/100 Harrison Madin figurine (Standing)
Kit Features & Gimmicks[]
Articulation[]
- The head can rotate on a ball joint.
- The torso can tilt/rotate on a double-sided ball-and-socket joint.
- Shoulder joints can slightly swing forward or raise upwards.
- The arms can...
- Swing on a peg joint.
- Raise horizontally.
- The upper elbows can turn.
- The elbows and knees are double-jointed.
- The elbow joints can rotate.
- The manipulators...
- Feature 3+1+1 articulation on each finger.
- Can swivel on a ball-and-socket joint.
- Can pivot on each wrist.
- Front, side, and rear skirt armors can pivot to avoid interference with the legs.
- The upper thighs can swing frontwards/backwards, raise horizontally and/or rotate on each piece.
- The ankles can tilt/pivot in a very limited extent.
- Each of the front foot parts can pivot upwards.
Weapons/Other Gimmicks[]
- Any of the weapons can be wielded by the poseable hands.
- Each palm features a molded tab for gripping stability.
- The head unit can convert between normal and face open modes. ("Helmet" must be removed first.)
- The heat radiation fins can slide out via a switch inside the shoulder armor. (Armor panels must be removed first.)
- The radiation panels on the rear lower legs can be flipped out.
- Central upper panel can slide forwards to reveal a cockpit.
- The V.S.B.Rs can wedge out and convert into firing modes.
- Waist armor panels can be opened to reveal a spare removable Beam Shield Generator (right) and 2 Beam Sabers (right).
- Beam Sabers can also be optionally removed as handheld weapons.
- The holster can rotate on the skirt armor.
- Beam Sabers can also be optionally removed as handheld weapons.
- Beam Rifle foregrip can swing left or right.
- Beam Launcher's foregrip can swing.
- Beam Launcher can also be mounted onto the rear waist armor via a flip-out mounting panel.
- Beam Shield can be mounted onto the left forearm via minor rearrangements.
- Gundam F91 can be mounted onto any Action Bases (Sold separately) 1 and 4.
Tips & Tricks[]
- For better results, some or most of the details are needed to be painted and panel-lined with Gundam Markers and/or Mr. Color Paints.
- The instructions also recommends the builder to paint the kit into the 1st colors seen in the Jupiter War.
- Topcoat (Mr. Hobby recommended) can be used to protect applied stickers.marking decals and if any, painted details.
- The middle, ring, pinky fingers can be sliced off for individual articulation. (NOTE: May decrease gripping stability.)
[]
- High Detail Manipulator 132 can be used for this kit.
Variants[]
- Later reissues of the Gunpla will feature a blue-colored Bandai Spirits logo.
Notes & Trivia[]
- This Gunpla is the only model kit iteration of Harrison's F91 to be decoed in the color scheme seen in Mobile Suit Crossbone Gundam: Steel 7.