The High Grade Universal Century (HGUC) RX-0 Unicorn Gundam 03 Phenex (Destroy Mode) (Narrative Ver.) is a 1/144 scale kit released in 2018.
Includes[]
- Unicorn Gundam 03 Phenex
- Manipulators:
- Weapon-holding (1 pair)
- Trigger-finger (right)
- 1 pair of Armed Armor DEs
- Tail stabilizer units
- Manipulators:
- Beam Magnum
- Beam Magnum Magazine
- Shield (Destroy Mode)
- Adapter (arm)
- Adapter (backpack)
Kit Features & Gimmicks[]
Articulation[]
- The head can pivot up/down on a hinge and swivel on a ball-joint neck.
- The shoulder joints can slightly raise upwards and/or slightly swing forwards/backwards.
- The arms can...
- Swing on a peg-and-socket joint.
- Raise horizontally.
- The upper arms can rotate.
- Both elbow and knee joints can be bent up to 90 degrees.
- The manipulators can swivel on a ball-and-socket joints.
- Front and side skirt armors can pivot to avoid interference with the leg articulation.
- The waist can swivel on a ball-and-socket joint construction.
- The hip joint axis can swing frontwards/backwards on one side.
- The upper thighs are swivel on a ball-and-socket joint construction, though the backwards articulation is limited due to the non-poseable rear skirt armors.
- The ankles can slightly tilt forwards/backwards, or sideways.
- The Armed Armor DEs can rotate on a backpack arm.
- The "tail" stabilizer units are poseable with one ball-joint and three hinge joints.
Weapons/Other Gimmicks[]
- The hands are swappable. Only right alternative hand is included.
- Each of the weapons must be wielded by their own respective hands.
- The Beam Saber hilts can be optionally removed from the backpack as handheld weapons. (Beam Effect parts sold separately.
- Beam Magnum can mount onto either both sides of the arms or onto the backpack via a flip-out tab.
- Beam Magnum Magazine can be stored onto the rear waist armor.
- Unicorn Gundam 03 Phenex can mount onto any Action Bases. (Sold separately)
Tips & Tricks[]
- For better results:
- Most of the details are needed to be applied and panel-lined with Gundam Markers.
- The gold parts can be applied with Chrome Gold paint. (Note: Do not paint them while they're on the runners.)
- Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals.
- If using matte/flat-finish top coat, it is advisable not to spray on the translucent parts - can be done by masking or spraying top coat while the said parts are separated.
- The Gunpla can be built into the original Phenex (sans the tail pieces) by using the included surplus pieces and some extra polycaps.
- Care must be taken while separating the hand parts: Due to its slightly tight construction, the pin that connects the thumb section can potentially snap off if you separate it with excessive force.
Customizing-based tips[]
- Front skirt's joint can be optionally separated.
- The Hyper Bazooka, Beam Saber effect parts and the open hands from the HGUC RX-0 Unicorn Gundam (Unicorn Mode) (Repaint required.), the Gundam UC ACE Vol.6 exclusive Hyper Beam Javelin, the Hyper Beam Javelin from the System Weapon 007 can be used for this kit.
- The clear parts from The Gundam Base exclusive variant can be used to swap the Psycoframe parts (and its polycaps) to recreate the deactivated version of the unit.
[]
- High Detail Manipulator 200 can be used for this kit. (Repaint required.)
Notes & Trivia[]
- This Gunpla is the first Standard release of the HGUC Unicorn Gundam Phenex kit.
- For the sake of covering the upcoming spoilers for the Anime film, The instruction manual & the box made no mention of the Mobile Suit's pilot: Rita Bernal.
Variants[]
Italicized item/s are exclusives.
- Reissues of the kit from September 2018 onward will feature a blue-colored Bandai Spirits logo. Later reprints from mid-2022 will also feature an additional Bandai Namco logo.
- HGUC RX-0 Unicorn Gundam 03 Phenex (Destroy Mode) (Narrative Ver.) (Gold Coating Ver.)
- HGUC RX-0 Unicorn Gundam 03 Phenex (Destroy Mode) (Narrative Ver.) (Clear Color Ver.)
- HGUC RX-0 Unicorn Gundam 03 Phenex (Destroy Mode) (Narrative Ver.) (Final Battle Ver.) (The Gundam Base exclusive)
Gallery[]
Packaging[]
Stock Photos[]
Notes:
- Images show a model completed by a professional builder. Actual product may differ.
- Action Base 5 sold separately.
Footnotes[]
External Links[]
Official[]
Reviews[]
Sites[]
Videos[]